PDA

View Full Version : safety check placement


lois
07-22-2008, 11:12 AM
just posting this here for future reference:

from Hawaii Administrative Rules, 19-133.2-24

(b) After the certificate of inspection is signed, a two-part inspection sticker shall be affixed by the inspector upon the right, most nearly vertical portion of the rear bumper of the vehicle or on another appropriate place, such as, on the body immediately above the right portion of the rear bumper, or a special bracket installed horizontally under the right portion of the rear bumper where the sticker can be clearly viewed by a person who is fifty feet behind the vehicle. The rear window or license plate is not an appropriate place.

corytomo
07-23-2008, 04:49 PM
I need to put my back in a legal place! oh wait, its expired anyway....lol

Nick
07-23-2008, 08:20 PM
Thanks for posting that Lois. I forgot where for put the stickers.

lmfao.

Nah, some customer was giving me a hard time cause I failed his trailer cause it flashing improperly. He said he has been doing electrical work on cars for 45 years. I had to laugh because if he has been doing it for 45 years, he should know that he did it wrong if they don't flash properly.

Rob
07-24-2008, 10:39 AM
Lois... lets clarify placement of the stickers on plates... where they need to be.

lois
07-24-2008, 10:49 AM
NO STICKERS directly on plate, no stickers on horizontal brackets next to plate

the license IS NOT AN APPROPRIATE PLACE includes that bracket next to license.