|
Register | Members List | Social Groups | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
Autocross General Autocross Discussion |
![]() |
Thread Tools | Display Modes |
![]() |
#26 | |||||
dropin the duece since 82
Additional Info
Credits: 5,087.75
![]() |
![]()
is the rear +1.3 or -1.3
they are gonna tell you to get more - camber in the front ![]()
__________________
Don't Blame Me, I Voted For An American
|
|||||
![]() |
![]() ![]() |
![]() |
#27 | ||||
Mark of Shame
Additional Info
Credits: 3,727.85
![]() |
![]()
Says -1.3 in my post haha.
__________________
![]() |
||||
![]() |
![]() ![]() |
![]() |
#28 | |||||
dropin the duece since 82
Additional Info
Credits: 5,087.75
![]() |
![]()
yeah but you said most positive you can get
is that like least negative? cause its still negative why so much in the back but so little in the front? is that stocky on altima's? or did things change if you lowered??
__________________
Don't Blame Me, I Voted For An American
|
|||||
![]() |
![]() ![]() |
![]() |
#29 | ||||
PW Aficionado
Additional Info
Credits: 10,457.55
![]() |
![]()
iirc, lowering can sometimes produce negative camber if you really drop it down.
perhaps the front has more adjustibility from the factory for camber than the rear? i know my auto-x civic had to be readjusted before and after every race since i dropped it for auto-x and raised it for daily use (too low to be practical otherwise). might be a similar case - lowering = more negative camber than can be fixed within the factory range of adjustments.
__________________
"wide open till you see God, brake when you see Elvis".
|
||||
![]() |
![]() ![]() |
![]() |
#30 | ||||||
Mark of Shame
Additional Info
Credits: 3,727.85
![]() |
![]() Quote:
Quote:
That is exactly what is happening. The front is dropped 2.5 inches and the rear is dropped about an inch. My front is within factory specs, but the rear can't get into specs without a camber kit.
__________________
![]() |
||||||
![]() |
![]() ![]() |
![]() |
#31 | ||||
Breaker
Additional Info
Credits: 1,540.15
![]() |
![]()
Hmm... and here I thought imports could adjust alignment easier. I'm running -2.1 right now with stock control arms. Once I get the tubulars, I should be able to go up to -3*
__________________
1996 DGGM Impala SS - 249hp & 296tq - 14.78 @ 90.12 mph - 4440lbs w/ driver Autocrosser - Drag Racer - Road Racer - Daily Driver ![]() Autocross! You're doing it wrong! |
||||
![]() |
![]() ![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|