Stock Trader Top Investors HT Affiliates
Go Back   Hawaii Talks - Hawaii's Online Community Forums! > Hawaii's Racing Community > Scale Auto, RC Hobbies & Racing

Scale Auto, RC Hobbies & Racing General Scale, Auto & RC Discussion

Thread Tools Display Modes
Unread 06-28-2010, 07:39 AM   #1
slowpoke's Avatar
Additional Info
Waipio, HI
Credits: 1,986.95
slowpoke is on a distinguished road
Default M-05 Tech Thread

I saw the M-03 and M-04 tech threads so I thought I'd start one for the M-05...

For the first setup tip, here's a trick I used on my M-05 Pro to get rid of a bunch of slop in the steering. You've probably noticed that the plastic steering posts that the bell cranks ride on are a little too small in diameter. Just wrap a piece of Scotch tape around each post and trim it nicely so you have a single wrap with no overlap and you'll have a perfect fit for the kit ball bearings. This way you don't have to buy the expensive aluminum stuff to have precise steering in your M-05.

Note: You'll probably need to have ball bearings in your bell cranks in order for this to work. I wouldn't try it if you are using the bushings that come with the base kit.
slowpoke is offline  
Reply With Quote Share with Facebook

Facebook Comments


m-05, m05, setup, tips, tricks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -10. The time now is 11:21 AM.
Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
vBCredits I v2.0.0 Gold ©2010, PixelFX Studios